Profi - Toothed belt HTD-3M 15 mm sold by the meter in industrial quality - manufactured according to ISO 13050
Optimal for micro step control - CNC machines
The Polyurethane-toothed belt enables a wide range of customer-specific drive designs. From linear technology to individual transport solutions, power transmission, center distance bridging and gear ratio changes.
The rounded / semicircular tooth profile increases the strength of the belt, ensure a quieter operation, a better grip on the belt pulley and for a longer lifetime.
Steel tension cords are located in the toothed belt. As a result, toothed belts can transmit higher forces, are low stretch and suitable for precise controls.
Reinforced design for high loads with low space requirements.
Traction: 3M: 150N; 5M: 350N (permissible toothed belt tensile force with 10 mm belt width)
The working temperature range is -20 to 80 °C
HTD00003M015
Technical specifications
Profile: HDT-3M
Type HTD-3M-Teilung 3 mm
Width: 15 mm
Maximum spin speed: 80 ms-1
Maximum available length in one piece: 50 m
Advice for installation and use
The toothed belts must be precisely aligned.
Belt pretension is required.
The belt tension must be adjusted (the circumferential force and the pretensioning force must not exceed the permissible belt tensile force)
At least one toothed belt pulley must have flanged wheels.
At least 6 teeth have to be in mesh.
The toothed belt drives should not be lubricated.
* Quality product from the stockist *
* New and original packed up *
Scope of delivery: 1m of toothed belt with guarantee / invoice
