Profi - Control for 3 axes - including:

• 3x output stages SK 8060 up to 6 A
• 1x power supply - switching power supply unit S500 up to 72 V and 7 A
• 1x interface board with optical isolated connection to the PC and up to 4 axes
• 1x emergency off switch
• 3x reference switch - microswitch VT roller lever L-12
• 3x stepper motors 8.7 Nm and 6 A
• 3x flexible shaft coupling fi-14 x 20 mm
• 3 m CNC copper cable flexible 4 x 1.5 mm²  - shielded

Technical specifications - Descriptions

• Quiet motor running and low heating of motor and output stage.
• Good motor speed thanks to the use of the latest bipolar technology
• A closed housing that can be installed vertically or horizontally protects against mechanical defects   
• With overvoltage and short circuit protection.
• Interface board with integrated optoisolation protects the computer form damage.
• Adjustable with DIP switch(no multimeter for setting up needed)
• Automatic current reduction to 50% in standstill (sleep). (via DIP switch)
• Can be used for 2 - 3 phase and 4 phase stepper motors.
• A printed description and connection diagram is included + configuration file for Mach 3.

• Jumpers per phase of 2,0; 2,6; 3,2; 3,7; 4,3; 4,8; 5,4; 6,0 A adjustable
• 20-50 volt motor voltage
• Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
• Logic TTL-compatible (5Volt), signal control 400 kHz
• Microstep 1/2 -, 1/4 -,1/8 -, 1/16 -, 1/32 -, 1/64 -, 1/128 -, 1/256 -, 1/5 -, 1/10 -, 1/25 -, 1/50 -, 1/125 -, 1/250
• Configuration control LED
• Dimensions: W = 50mm, H = 100mm, L = 150mm

• Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
• Standard mounting device, therefore identical to most products from other power supply manufacturers.
• Protected against overload, overvoltage and short circuit.
• International use possible through AC and DC wide range input 110 -240 V/AC.
• Power supply unit with very low standby consumption. Environmentally friendly.

Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 72 V/DC -adjustable: from 65 to 79 VDC
Output power: 500W 7 A - 3x screw connections
Efficiency: approx. 82% 
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =115mm, H =50mm, L=220mm

• Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
• 2 relays for switching functions for e.g. a spindle or coolant pump.
• Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
• The distribution of the plug connections is identical to the distribution of our micro-step cards.
• A printed pin assignment and a connection diagram as an example is included in the delivery.

• Optoisolation protects the computer from damage.
• 2 relays for additional switching functions 5A / 230V
• 3 connections for limit switch / reference switch
• with Connection for emergency stop switch and tool rating switch
• Current input: 12V/250mA
• Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
• Logic TTL-compatible (5Volt)
• Removable screw connectors
• Dimensions: W= 115mm x H=77mm x L=20mm

• The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
• RoHS-compliant
• Installation-Ø: 22 mm screw fastening
• Button-Ø: 40 mm
• Switching capacity: 250 V/AC/3,0 A
• Connection: screw connection Design: NC 1 x on/(on)
• Temperature range: -20 - +55 °C

• RoHS-compliant
• Lever: roller lever L-12mm
• Execution: changer / role
• Switching capacity: 250 V/AC/16(4) A
• Connection: plug connection 6.3 x 0.8 mm or solder connections
• Dimensions:(W x H x L) 30 x 16 x 10 mm

• Holding torque: 8.7 Nm bipolar 4 connection cables
• Phase current: 6 A / 3.6 V, - 2 phases
• Step angle: 1.8°
• Dimensions: W=86mm, H=86mm, L=113mm,
• Shaft d= 14.00mm
• Weight: 1.9 kg

• Elastic, torsionally stiff but flexible
• Optimal for micro step control
• 1-part coupling with one-part connector
• Made from high quality aluminum alloy
• Inner diameter bore: both sides fi 14 mm
• Outside diameter: fi 30 mm
• Total length: 34.5 mm
• Shaft displacement of up to 3° possible
• Continues bore - tolerance H7
• Shaft montage with clamping screw

* Quality product from the stockist *

* New and original packed up *

 

Scope of delivery:
3x output-stage-stepper-motor-control for 1 axis 6 A
3x stepper motors 8.7 Nm 6 A
3x flexible shaft coupling fi 14 mm
3m CNC copper cable flexible 4 x 1.5 mm² - shielded
1x power supply - switching power supply S500; 72 V; 7 A
1x interface board opto-isolated connection to PC up to 4 axes
1x emergency stop switch
3x reference switch - microswitch VT roller lever L-12
Operation manual
Guarantee / invoice
Data sheet with pin assignment