Main page » Complete control - CNC set » Complete control CNC-set-1 for 3 axes with stepper motors - 1 Nm, transformer, emergency stop, reference switch, coupling and cable
Complete control CNC-set-1 for 3 axes with stepper motors - 1 Nm, transformer, emergency stop, reference switch, coupling and cable
1x control for 3 axes with metal housing SM3 up to 3.0A
1x power supply - switching power supply unit S150 up to 28 V and 6.3 A
1x LPT connection cable to PC
1x emergency off switch
3x reference switch - microswitch VT roller lever L-12
3x stepper motors 0.5 Nm and 2.5 A
3x flexible shaft coupling fi-6.35 x 20 mm
3 m CNC copper cable flexible 4 x 0.5 mm2 - shielded
Technical specifications - Descriptions
*1 piece control for 3 axes with metal housing SM3 up to 3.0 A, CNC control PC-NC
A closed housing that can be installed vertically or horizontally protects against mechanical defects
With overvoltage and short circuit protection.
Interface board with integrated optoisolation protects the computer form damage.
Connection for spindle speed regulation via PC or controller.
Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
2 relays for switching functions for e.g. a spindle or coolant pump.
Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
Automatic current reduction to 100%, 75%, 50%, 25% in standstill (sleep). (via DIP switch)
Can be used for 2 - 3 phase and 4 phase stepper motors.
A printed description and connection diagram is included + configuration file for Mach 3.
Jumpers per phase of 0.75; 1.50; 2.25; 3 A adjustable
12-34 volt motor voltage
Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
Logic TTL-compatible (5Volt), signal control 400 kHz
Microstep 1 / 1-, 1/2 -, 1/8 -, 1/16 -
Toshiba TB6560AHQ chip
Signal control 100 kHz
Optoisolation protects the computer from damage.
2 relays for additional switching functions 5A / 230V
4 connections for limit switch / reference switch
with Connection for emergency stop switch and tool rating switch
Additional current output for 12 V / 1 A e.g. for fans
Connection for spindle speed regulation signal 0 to 10 V.
With built-in potentiometer - you can reduce the spindle signal range
Removable screw connectors
Closed metal housing
Configuration control LED
Dimensions: W = 130mm, H = 35mm, L = 150mm
Description - Completion for spindle
Current consumption max. 50 mA Control signal: 0 - 10 V The shape of the pulse course: Rectangular
Source ability: 20 mA
Constant processing: 100Hz / 0.1
Non-linearity: not greater than 0.1%
* 1 piece Power supply unit - Switching power supply unit S150 24 V
Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
Standard mounting device, therefore identical to most products from other power supply manufacturers.
Protected against overload, overvoltage and short circuit.
International use possible through AC and DC wide range input 110 -240 V/AC.
Power supply unit with very low standby consumption. Environmentally friendly.
Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 24 V/DC -adjustable: from 21 to 28 VDC
Output power: 150W 6,3 A - 2x screw connections
Efficiency: approx. 85%
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =98mm, H =38mm, L=159mm
* 1 piece LPT connection cable to PC
Data cable for connections between control and PC or controller
Double shielded 2 x 25 - pol
* 1 piece - emergency off switch
The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
RoHS-compliant
Installation-Ø: 22 mm screw fastening
Button-Ø: 40 mm
Switching capacity: 250 V/AC/3,0 A
Connection: screw connection Design: NC 1 x on/(on)
Temperature range: -20 - +55 °C
* 3 reference switches - microswitch VT roller lever L-12
RoHS-compliant
Lever: roller lever L-12mm
Execution: changer / role
Switching capacity: 250 V/AC/16(4) A
Connection: plug connection 6.3 x 0.8 mm or solder connections
Dimensions:(W x H x L) 30 x 16 x 10 mm
* 3 pieces - 1 Nm 2 A stepper motors
Holding torque: 1 Nm bipolar 4 connection cables
Phase current: 2 A / 3.0 V, - 2 phases
Step angle: 1.8° - 200 Steps / rev
Dimensions: W=57mm, H=57mm, L=56mm,
Shaft d=6.35 /20 mm
Weight: 0.7 kg
* 3 x flexible shaft coupling fi 6.35 mm
Elastic, torsionally stiff but flexible
Optimal for micro step control
1-part coupling with one-part connector
Made from high quality aluminum alloy
Inner diameter bore: both sides fi 6.35 mm
Outside diameter: fi 20 mm
Total length: 24.5 mm
Shaft displacement of up to 3° possible
Continues bore - tolerance H7
Shaft montage with clamping screw
* 3 m CNC copper cable flexible 4 x 0.5 mm2 shielded
Shielded against electromagnetic interference fields ensures a interference-free signal transmission.
Possession was heard Cable strength has a longer service life then conventional cables.
Resistant to a wide variety of oils, acids and other chemical media.
Space-saving installation.
If you have any further questions about this product, just send us an email to info@cncprofi.eu.
On request, we can also prepare complete CNC systems with software and ready for connection, if you are interested. Please give a precise description.
* Quality product from the stockist *
* New and original packed up *
Scope of delivery: 1x stepper motor control for 3 axes 3.0 A
3x stepper motors 1 Nm 2 A
3x flexible shaft coupling fi 6.35 x 20 mm
3m CNC copper cable flexible 4 x 0.5 mm2 - shielded
1x power supply - switching power supply S150; 24 V; 3,6 A
1x LPT cable
1x emergency stop switch
3x reference switch - microswitch VT roller lever L-12
Operation manual
Guarantee / invoice
Data sheet with pin assignment
