The controller was designed and manufactured by CNC Profi to automate the production process. It is designed so that it can work with stepper motors, servomotors or frequency converters and solenoid valves directly from the control.
Programmable CNC controllers are used in the automation of machines such as: plotters, milling machines, lathes, plasma cutters, lasers ...
The CNC controller Profi D4 represents a new quality on the market. They enable certain processes to be automated and service maintenance to be carried out quickly and therefore cost-effectively by users who have not completed any specific relevant training.
The programmable CNC automation devices are also characterized by their versatility in their use, since the programs can be changed or improved using simple methods.
The main advantages include:
extremely fast and easy management with which you can implement the motion sequences
Possibility of adjustments or changes without a PC. All commands are entered via the integrated keyboard. Optional - import of G code via micro SD card
with the programmable controller, you also have versatility in its use. The programs can be created or improved using simple methods, using an integrated editor, with the support of G Code and M Code, standard ISO
7 special inputs are available for limit switches / reference switches, start, stop, NOT stop and other functions. These inputs are all opto isolated. In addition, a further 7 inputs can be assigned
reverse backlash compensation
Ramp (acceleration) adjustable
2 relays for switching functions
10 digital outputs, direct switching of solenoid valves via the controller up to 2A / 24V
optionally, each tool can be measured using a sensor
Connection for spindle speed, control signal: 0 to 10 V
motor control, logic TTL compatible (5 Volt) (Step / Dir)
the number of program runs can be controlled both manually and automatically by events in the process itself
Switchable programming key lock with password
to secure the settings you can set a password
control up to 4 axes synchronously
Zero points from G 54 to G 59 can be defined in separate zero point memories, for the 4 axes each
it is ensured that the controller can be configured for the entire machine in a simple and clear manner using various menus
In addition, 19 operating points for 4 axis values each can be saved and used in X Y Z A
the speed of the work spindle can be changed with an external potentiometer or the integrated keyboard within a definable interval. Factory setting: (60% - 150% )
while runing we can decelerate and accelerate the feed, within a definable interval. Factory setting: (0 -150%)
can be installed as a practical hand module or in the control cabinet
Handwheel control
Functional description
Four operating modes: manual (MAN), semi-automatic (MDI), automatic (AUTO) and program edition (EDIT)
In manual mode (MANUELL) you can:
move the machine manually
Initialize the axes (define the coordinate of the current position), if necessary define the machine zero point by reference travel
the manual mode (MANUELL) enables the respective motor to be moved with the "Start" / " Stop" keys on the keyboard or with the external keys connected to the controller (minus / plus)
Selection between continuous feed mode (JOG) and step mode (MPG) with a value of optionally 0.10; 0.01; 0.001 mm or jog mode
In semi-automatic mode (MDI) you can:
single sets of G code commands, editable and executable at the same time, without changing the mode
all functions that are available in the automatic mode can also be used to their full extent in this mode
In automatic mode (AUTO) you can:
carry out the automatic processing of the programs in this mode
select the program number using the arrows on the keyboard: [3] and [6] until the desired program number appears
the number of repetitions of the subroutine can be determined and started in the main program
subroutines can be repeated any number of times using UP calls
the program can be interrupted and continued with the [STOP] and [START] keys
a stopped program can be canceled with the (Mode) key
In edit mode (EDIT) you can:
Work programs are edited and saved in this mode
Save multiple programs
the number of programs depends on the amount of information you put in, if the programs are short, you can of course create a lot more programs. Approx. 100 programs with 30 lines each are considered as references
an axis can be traversed in each line at a programmed speed
In addition, the delay time relay switching or spindle speed can be controlled in each line
any number of outputs can also be switched directly or indirectly in each line
Technical data
Axis control via step direction (step-dir) signal
linear interpolation of all 4 axes, 2 axes circular interpolation, variable axes
optional import of G code via micro SD card slot
Support of G Code and M Code, Standard, ISO
Supply voltage: 12-24 V DC Current consumption: max. 2 A
Frequency range: 0-300 kHz
Shape of the pulse waveform: symmetrical, rectangular 5 V (CMOS) TTL compatible
Scope of delivery:
1 CNC-Controller D4 4 Axial
1 piece of Operation Manual (German, English, Polish)
We are also available with advice and action after the purchase
with guarantee / invoice
